Анализаторы динамических сигналов, измерение параметров физических и механических воздействий - Keysight Technologies

Список производителей → Keysight Technologies → 1. Осциллографы, анализаторы, измерители → Анализаторы динамических сигналов, измерение параметров физических и механических воздействий

Дополнительная информация на сайте производителя.

Всего: 9

	Название	Описание
	16008B Resistivity Cell	The 16008B is designed to operate specifically with the 4339A/B High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials.
	16451B Dielectric Test Fixture	The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150. The 16451B employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. An LCR meter or an impedance analyzer is then used to measure the capacitance created from the fixture.
	16452A Liquid Test Fixture	The 16452A provides accurate dielectric constant and impedance measurements of liquid materials. The 16452A employs the parallel plate method, which sandwiches the liquid material between two electrodes to form a capacitor. An LCR meter or an impedance analyzer is then used to measure the capacitance created from the fixure.
	16453A Dielectric Material Test Fixture	The 16453A is designed for accurate dielectric constant and loss tangent measurements on the E4991A/4291A/B. It employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor.
	16454A Magnetic Material Test Fixture	The 16454A is designed for accurate permeability measurements of toroidal-shaped magnetic materials. Since the construction of this fixture creates one turn around the toroid (with no magnetic flux leakage), the need of winding a wire around the toroid is unnecessary.
	35670A 2 or 4 channel FFT Dynamic Signal Analyzer, DC-102.4 kHz	The Agilent 35670A is a versatile FFT analyzer with built in source for general spectrum and network analysis, and for octave, order, and correlation analysis.
	85070E Dielectric Probe Kit	The Agilent 85070E Dielectric Probe Kit, used with an Agilent network analyzer, determines the intrinsic electromagnetic properties of many dielectric materials. Because these properties are determined by the molecular structure, they can be related to other properties of interest as well. Measuring them can provide critical insight to applications in many industries.
	85071E Materials Measurement Software	The Agilent Technologies 85071E Materials Measurement software streamlines the process of measuring complex permittivity and permeability with an Agilent Network Analyzer. The easy-to-use software guides the user through setup and measurement, instantly converting S-parameter network analyzer data into the data format of your choice and displaying the results within seconds.
	85072A 10-GHz Split Cylinder Resonator	The Agilent 85072A 10-GHz split cylinder resonator measures permittivity and loss tangent of thin film, un-clad substrates and low loss sheet materials according to the IPC TM-650 2.5.5.13 test method. Designed for robustness and ease of use, it features precision cylinders to ensure high Q factor and loss tangent resolution.

Страницы: 1